Drain Snake, Sink Snake, Drain Cleaning Equipment - General Pipe Cleaners

The Super-Vee offers you a complete system for cleaning sink, tub and laundry drain lines through 3″ in diameter. With a variety of cables, cutters, and accessories available, you have the right combination for any clogged drain problem.

The Slide Action Chuck™ makes drain cleaning easier. Just pull the Grip Shield back to engage the cable – slide it forward to release. It’s safer than a spinning chuck and it automatically adjusts for different cable diameters. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times.

Quick Change Cable Cartridges make it easy to switch to a different diameter cable. You just loosen three screws, pull the front of the drum off and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The drain cleaning machine holds 50 ft. of 1/4” or 5/16”, or 35 ft. of 3/8” Flexicore cables.

The Super-Vee also comes with the new Band-It™ splashguard to minimize excess water spray from the spinning drum.

The Super-Vee is built to clear clogged drains for a decade or more. And our Dyna-Thrust™ bearing system is one reason why. It helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Of course, the drain cables are Flexicore® – with an integral wire rope center. Nobody makes cables like General.

Features

  • For sinks, tubs and laundry drains
  • Slide-Action™ chuck built into grip shield
  • Automatically adjusts to different cable diameters
  • Quick-change cartridge makes switching cables clean and easy
  • Unique Dyna-Thrust™ bearing system for longer tool life.
  • Band-It™ splashguard minimizes excess water spray from the spinning drum.
  • Holds 50 ft. of 1/4″ or 5/16″, or 35 ft. of 3/8″ Flexicore® cable.
  • Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
  • Made in U.S.A.

Slide Action Chuck

With a quick movement of the Grip Shield, you release or engage the cable – without the need for a chuck, and with automatic adjustment for different cable diameters. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times. Because the Slide Action Chuck is linked to the Grip Shield, handling is easy and comfortable.

Steps

  1. Slide Grip Shield FORWARD to release cable.
  2. Pull Cable out of drum. Slide Grip Shield BACK to grip cable.
  3. Run cable into line and repeat. It’s that quick!
Super-Vee® drain chuck cutaway

Slide Action Chuck and Cartridge Refill Cables

 

Cartridge Refill

To switch to a different diameter cable (or even connect two 3/8″ cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you’ll probably want to store all of your cables in them.

Flexicore Cable

Flexicore® Patent Nos.
2,244,735 and 2,849,870

Flexicore®Cable

Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.

Learn More

Options

Down Head Fitting

All-purpose Down Head Fitting (Catalog #DHF) can be used with all standard HECS cutters.

Closet Auger Attachment

Closet Auger Attachment (Catalog #CAA) Guides 1/4″ or 5/16″cable into bowl.

Carrying Case

Carrying Case (Catalog #MCC) For Super-Vee, Power-Vee and Handylectric.

Handy-Stand

The rugged Handy-Stand turns General’s popular and reliable hand-held drain cleaners into practical countertop or floor machines. Ergonomically balanced for maximum stability, the lightweight portable Handy-Stand fits the Super-Vee®, Power-Vee®, and Handylectric®, All three models are ideal for unclogging sinks, tubs, and laundry drains.

The convenient Handy-Stand makes it easier for you to carry your hand-held machine to and from the jobsite. The lift handle doubles as a spare cartridge holder and protects your machine from damage. On the job, the Handy-Stand can be positioned either horizontally or vertically for maximum flexibility.

The Handy Stand

Uni-Stand™

Save your arms and make drain cleaning easier with General’s new
Uni-Stand! It securely supports your hand-held drain cleaner when you’re working in tight spaces like under sinks and kitchen cabinets. Just slide the adjustable clamp around the motor housing – and lock it into place for safe, solid support. Adjust the length of the Uni-Stand leg to the height desired. Then rock your machine back and forth as you feed the cable into the line.

Uni-Stand snuggly fits General’s popular Super-Vee®, Power-Vee®, and Handylectric® hand-held drain cleaners. All three are ideal for unclogging small diameter lines in sinks, tubs, and laundry drains. Uni-Stand works with many competitive machines, too!

More Information

ClogChopper®

Rip through tough stoppages with the unique ClogChopper® multi-function cutting tools. Six self-sharpening blades dig into encrusted debris and root masses, easily grinding up stoppages, scale, and crystallized urine, without risking pipe damage.

The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls. It’s excellent for clearing stacks, downspouts, mains, as well as for drain lining jobs.

More Information

Snake-Oil Classic

A great way to extend the life of drain cleaning tools & equipment

Snake-Oil Classic™ preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give equipment a fresh, clean smell. Available in quarts or gallons.

Snake-Oil Classic SDS – Material Safety Data Sheet

More Information

Cutter Set

AH

Arrow Head Starting Drill
Starting Drill (Gets water flowing)

BG

Boring Gimlet
For removing loose objects

DHBG

Down Head Boring Drill
For removing loose objects
(Goes down waste, not up stack)

FAH

Flexible Spring Arrow Head Cutter Starting Drill (For sharp turns and small lines)

1-1/4 SCB

1-1/4" Side Cutter Blade (2-piece set)
For cutting and scraping

Buy Now

BOLD indicates best-selling units.
Super-Vee Units - Complete and ready to Operate

Item # Catalog # Description Weight  
100030 SV-A-WC

Super-Vee with carrying case, 25HE1 (25 ft. x 1/4″), 25HE2 (25 ft. x 3/8″) cables, HECS cutter set and cartridges.

31 lbs
WHERE TO BUY
100050 SV-B-WC

Super-Vee with carrying case, 25HE1 (25 ft. x 1/4″), 35HE2 (35 ft. x 3/8″) cables, HECS cutter set and cartridges.

34 lbs
WHERE TO BUY
100070 SV-C-WC

Super-Vee with carrying case, 50HE1 (50 ft. x 1/4″), 35HE2 (35 ft. x 3/8″) cables, HECS cutter set and cartridges.

38 lbs
WHERE TO BUY
100080 SV-D

Super-Vee with 25HE1-A (25 ft. x 5/16″) cable.

14 lbs
WHERE TO BUY
100090 SV-D-WC

Super-Vee with carrying case and 25HE1-A (25 ft. x 5/16″) cable.

25 lbs
WHERE TO BUY
100120 SV-F

Super-Vee with 25HE1 (25 ft. x 1/4″) cable.

13 lbs
WHERE TO BUY
100130 SV-F-WC

Super-Vee with carrying case and 25HE1 (25 ft. x 1/4″) cable.

24 lbs
WHERE TO BUY

Cutter Set

Item # Catalog # Description Weight  
130010 HECS

Handylectric Cutter Set (Includes Arrow head, Flexible Arrow Head, 1-1/4″ Side Cutter Blade, Boring Gimlet, & Down Head Boring Gimlet)

0.5 lbs
WHERE TO BUY

Replacement Cables

Item # Catalog # Description Weight  
120010 25HE1

Flexicore Cable, 1/4″ x 25 ft. with EL Basin Head

4 lbs
WHERE TO BUY
120020 50HE1

Flexicore Cable, 1/4″ x 50 ft. with EL Basin Head

8 lbs
WHERE TO BUY
120030 25HE1-DH

Flexicore Cable, 1/4″ x 25 ft. with Down Head

5 lbs
WHERE TO BUY
120040 50HE1-DH

Flexicore Cable, 1/4″ x 50 ft. with Down Head

9 lbs
WHERE TO BUY
120050 25HE1-DDH

Flexicore Cable, 1/4″ x 25 ft. with Double Down Head

5 lbs
WHERE TO BUY
120060 50HE1-DDH

Flexicore Cable, 1/4″ x 50 ft. with Double Down Head

9 lbs
WHERE TO BUY
120070 25HE1A

Flexicore Cable, 5/16″ x 25 ft. with EL Basin Head

6 lbs
WHERE TO BUY
120080 50HE1A

Flexicore Cable, 5/16″ x 50 ft. with EL Basin Head

12 lbs
WHERE TO BUY
120090 25HE1-A-DH

Flexicore Cable, 5/16″ x 25 ft. with Down Head

6 lbs
WHERE TO BUY
120100 50HE1-A-DH

Flexicore Cable, 5/16″ x 50 ft. with Down Head

12 lbs
WHERE TO BUY
120110 25HE1-AC

Flexicore Cable, 5/16″ x 25 ft. with Female Connector

6 lbs
WHERE TO BUY
120130 50HE1-AC

Flexicore Cable, 5/16″ x 50 ft. with Female Connector

12 lbs
WHERE TO BUY
120160 25HE2

Flexicore Cable, 3/8″ x 25 ft. with Female Connector

7 lbs
WHERE TO BUY
120170 35HE2

Flexicore Cable, 3/8″ x 35 ft. with Female Connector

10 lbs
WHERE TO BUY

Parts & Accessories

Item # Catalog # Description Weight  
140840 BNDT

Band-It™ Splashguard

WHERE TO BUY
133010 MCC

Carrying Case

9 lbs
WHERE TO BUY
133030 HST

Handy-Stand

6 lbs
WHERE TO BUY
133050 UNS

Uni-Stand

1.5 lbs
WHERE TO BUY
133020 CAA

Closet Auger Attachment

1 lb
WHERE TO BUY
141300 SV-25

Cable Grippers

WHERE TO BUY
136090 SV-31-3

Trigger Switch for Skil #6355-GWS

WHERE TO BUY
136100 SV-31-V-S

Trigger Switch for Skil #81596

WHERE TO BUY
128800 1CG

1” ClogChopper

1 lb
WHERE TO BUY
128810 1-1/2CG

1-1/2” ClogChopper

1 lb
WHERE TO BUY
128820 2CG

2” ClogChopper

1 lb
WHERE TO BUY
440120 SOQ

1 Quart Snake-Oil Classic

2 lbs
WHERE TO BUY
440150 SOG

1 Gallon Snake-Oil Classic

7.5 lbs
WHERE TO BUY

Specifications

Motor:
All ball-bearing, double-insulated, reversible motor with variable speed control;
0 – 500 rpm.

Drum:
Heavy gauge stamped aluminum with inner drum to prevent cable tangling.

Capacity:
50 ft. of 1/4″ or 5/16″ cable; 35 ft. of 3/8″ cable.
All cables are left hand wound and reinforced with a wire rope center.

Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4″ Side Cutter Blade, Flexible Arrow Head

Cable Cartridges:
Light weight, impact resistant plastic.

Slide Action Chuck:
Grip shield moves back to engage cable, forward to release it.
Automatically adjusts for different diameter cables.

Do You Need Help?

Check out our Pro Tool Selection Guide or chat with a Drain Brain! We can help you by answering any questions about our products you may have.

Chat with Us Tool Selection Guide

Success Stories

Plumbing runs in John Comerford Jr’s blood.  His grandfather and father were plumbers.  Now one of his sons is, too. “Our name is on our businesses,” Comerford says. “No one in my family has disgraced it yet – and I’m not…
John Comerford Jr Cleveland, OH
After four decades, Jack Elvig Sr. really values performance and reliability in drain cleaning tools.  “I’ve been exclusively in commercial property maintenance since 1966,” he says. “And in that time, I’ve developed a pretty clear picture of what works –…
Jack Elvig Sr. Seattle, WA
Clarence “Butch” Koch can’t say how old his Super-Vee® hand-held, powered drain cleaning machine really is. But he’s sure he’s had the tough, trusty tool over 45 years. Probably 50 years. And after a half century of rugged reliability, his…
Clarence “Butch” Koch Oshkosh, WI