Model DRZ™ With Powerful Motor and Patented Quick-Grip™ Chuck
The Model DRZ is a real labor-saver for your rental customers where the weight of the machine could get burdensome. It’s ideal for clearing clogged sinks, tubs, and laundry drains in 1-1/4″ to 3″ drain lines up to 50 ft. long.
The Model DRZ includes the patented Quick-Grip™ chuck to secure the drain cable during operation. With just a quarter turn, the three chuck jaws securely hold 1/4″, 5/16″ and 3/8″ Flexicore® cable for a wide range of small-line jobs. The Quick-Grip chuck can be released just as quickly to pull more cable from the drum. It’s faster, safer, and easier to use than a thumb screw.
Operate the machine horizontally on the kitchen counter or vertically on the floor next to the tub. The silent motor is powerful enough to clear the line quickly yet won’t disturb your renters while on the job. Use the pneumatic pedal to keep your hands free to control the drain cable.
The drum carries up to 50 ft. of 5/16″ Flexicore® wire rope center cable. Weighing as little as 30 lbs. the lightweight machine is easy to handle.
- Quick-Grip™ chuck lets you quickly grip or release the cable with just a quarter turn
- The tough impact resistant plastic drum
- Clears clogged sinks, tubs, and laundry drains in 1-1/4” to 3” lines.
- Compact, lightweight small line drain cleaner
- Powerful yet silent motor spins cables up to 50 ft. down the line.
- Tough impact resistant plastic drum can carry 50 ft. of 1/4″ or 5/16”, or 35 ft. of 3/8” Flexicore cable.
- Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
- Made in U.S.A.
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.
Flexicore® Patent Nos.
2,244,735 and 2,849,870
Patented Quick-Grip™ chuck
Quickly grips or releases the cable with just a quarter turn. Three chuck jaws securely hold 1/4″, 5/16″ and 3/8″ Flexicore® cable for a wide range of small-line jobs.
A great way to extend the life of drain cleaning tools & equipment
Snake-Oil Classic™ preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give equipment a fresh, clean smell. Available in quarts or gallons.
HANDYLECTRIC CUTTER SET – CATALOG #HECS
Arrow Head Starting Drill
Starting Drill (Gets water flowing)
For removing loose objects
Down Head Boring Drill
For removing loose objects
(Goes down waste, not up stack)
Flexible Spring Arrow Head Cutter Starting Drill (For sharp turns and small lines)
1-1/4" Side Cutter Blade (2-piece set)
For cutting and scraping
BOLD indicates best-selling units. Model DRZ Units with Quick Grip Chuck - Complete and Ready to Operate
|Item #||Catalog #||Description||Weight|
Model DRZ, plus 50HE1-AC (50′ x 5/16″) Flexicore Cable, and HECS Cutter Set
30 lbs. (13.6 kg) (without cable)
20” deep x 11” wide x 15” high (51 cm x 28 cm x 38 cm)
Durable, impact resistant plastic.
50 ft. of 1/4″ or 5/16″ cable; 35 ft. of 3/8″ cable.
All cables are left hand wound and reinforced with a wire rope center.
The patented chuck tightens firmly on the cable with just a quarter turn.
Three chuck jaws securely hold 1/4″, 5/16″ and 3/8″ Flexicore® cables.
1/5 hp, with forward-off-reverse switch, fuse protected
Pneumatic foot pedal leaves operator’s hands free to control cable
20 ft., 3 wire; equipped with ground fault circuit interrupter.
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4″ Side Cutter Blade, Flexible Arrow Head Cutter