Mini-Rooter Pro^®

Now with Wheels and Folding Handle

This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker. An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute.

The drum carries up to 75 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables.

Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley

Looking for Product Resources?

Instructions Literature Parts & Diagrams Video

Features

Clears 1-1/4″ to 3″ lines and most 4″ lines.
Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®
Built in 6” wheels for easy transport, and folding handle for compact storage.
Drum removes in seconds for more portability.
1/3 hp motor with reverse switch and pneumatic foot pedal.

Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
Built Here. Backed Here.

Removable Drum

You can take the drum off the Mini-Rooter Pro in seconds.

Folding Handle

The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck.

Built-in Dolly

Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job.

Flexicore® Cable

Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.

Flexicore®Patent Nos. 2,244,735 and 2,849,870

Learn More

Options

Power Cable Feed

A variable speed Power Cable Feed (optional) drives and retracts the cable at up to 16 feet per minute. Quickly adjusts between 3/8″ and 1/2″ cables without the need for tools or additional parts. Swings out of the way to make drum changing as easy as ever. For smoother performance, switch to the XP drum with inner drum cage.

Catalog #: PO-MR

J-Drum

With a J-Drum (optional), you’re ready for small drain work in seconds. Equipped with a Quick-Grip^™ chuck.

Catalog #: MR-250

Snake-Oil Classic^™

A great way to extend the life of drain cleaning tools & equipment

Snake-Oil Classic^™ preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give equipment a fresh, clean smell. Available in quarts or gallons.

Snake-Oil Classic^™ SDS – Material Safety Data Sheet

Quick-Fix^™

General Pipe Cleaners’ Quick-Fix^™ let’s you quickly repair broken drain snakes in the field. The unique Quick-Fix let’s you continue working and finish the job without returning to your shop to repair or replace a broken cable. The Quick-Fix is available in 1/2”, 9/16”, 5/8”, and 3/4” sizes with female or male connectors.

The pre-welded spring connector easily attaches in the field. Cut off the damaged cable end, thread the Quick-Fix onto the snake, and secure it with pliers or vice-grips—no welding needed! Once attached, it grips so tightly it won’t come off.

Mini-Rooter XP®

Power-Vee®

Cutter Sets

Cutter Set

Arrow Head Starting Drill

Catalog #AH

Starting Drill (Gets water flowing)

1-1/2″ U-Cutter

Catalog #1-1/2 UC

For cutting and scraping

2′ Side Cutter Blades

Catalog #2SCB

For cutting and scraping

Boring Gimlet

Catalog #BG

For removing loose objects