Model DRZ™ With powerful motor and patented Quick-Grip™ chuck
The Model DRZ is a real labor-saver on long jobs or working in a cramped area where the weight of the machine could get burdensome. It’s ideal for clearing clogged sinks, tubs, and laundry drains in 1-1/4″ to 3″ drain lines up to 50 ft. long.
No need to wear your arms out holding a heavy machine over the drain or under the sink. The compact design let’s you operate the machine horizontally on the kitchen counter or vertically on the floor next to the tub. Use the pneumatic pedal to keep your hands free to control the feed and guide hose. And the silent motor won’t disturb your customers while on the job.
The Model DRZ includes the patented Quick-Grip™ chuck that lets you quickly grip or release the cable with just a quarter turn. Three chuck jaws securely hold 1/4″, 5/16″ and 3/8″ Flexicore® cable for a wide range of small-line jobs. It’s faster, safer, and easier to use than a thumb screw.
The drum carries up to up to 50′ of 1/4″ or 5/16″, or 35′ of 3/8″ Flexicore wire rope center cable. Weighing as little as 30 lbs. the lightweight machine is easy to handle. Units with 3/8″ cable include our five-piece HECS cutter set.
Weighing as little as 30 lbs. this lightweight machine is easy carry to handle. Use the carrying handle on top to carry to and from the job.
- Quick-Grip™ chuck lets you quickly grip or release the cable with just a quarter turn
- The tough impact resistant plastic drum
- Clears clogged sinks, tubs, and laundry drains in 1-1/4” to 3” lines.
- Compact, lightweight small line drain cleaner
- Powerful yet silent motor spins cables up to 50 ft. down the line.
- Tough impact resistant plastic drum can carry 50 ft. of 1/4″ or 5/16”, or 35 ft. of 3/8” Flexicore cable.
- Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
- Made in U.S.A.
2,244,735 and 2,849,870
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage. Flexicore Patent Nos. 2,244,735 and 2,849,870
Patented Quick-Grip™ chuck
Quickly grips or releases the cable with just a quarter turn. Three chuck jaws securely hold 1/4″, 5/16″ and 3/8″ Flexicore® cable for a wide range of small-line jobs.
Cutter Set – Catalog #HECS
Arrow Head Starting Drill
Starting Drill (Gets water flowing)
For removing loose objects
Down Head Boring Gimlet
For removing loose objects
(Goes down waste, not up stack)
Flexible Spring Arrow Head Cutter
Starting Drill (For sharp turns and small lines)
1-1/4" Side Cutter Blade (2-piece set)
For cutting and scraping
Model DRZ Specifications
Weight: 30 lbs. (13.6 kg) (without cable)
20” deep (w/o Guide Hose) x 11” wide x 15” high (51 cm x 28 cm x 38 cm)
Durable, impact resistant plastic.
50 ft. of 1/4″ or 5/16″ cable; 35 ft. of 3/8″ cable.
All cables are left hand wound and reinforced with a wire rope center.
The patented chuck tightens firmly on the cable with just a quarter turn. Three chuck jaws securely hold 1/4″, 5/16″ and 3/8″ Flexicore® cables.
1/5 hp, with forward-off-reverse switch, fuse protected.
Pneumatic foot pedal leaves operator’s hands free to control cable.
10 ft., 3 wire; equipped with ground fault circuit interrupter.
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4″ Side Cutter Blade,
Flexible Arrow Head Cutter.
Do You Need Help?
Check out our Pro Tool Selection Guide or chat with a Drain Brain! We can help you by answering any questions about our products you may have.