Sewerooter T-4™ New Mid-Size Machine With More Muscle.
Improved Performance
The new Sewerooter T-4 does a better job of clearing inside drain lines up to 100 ft. long with 9/16” Flexicore cable. It has more torque than traditional 1/2 inch cables, yet it can be used to clear the same 3” to 4” drain lines. Need to clear tree roots too? Just switch drums to a 75 ft. x 5/8” Flexicore cable to clear 3” to 6” lines.
Added Durability
The heavy-duty variable speed Power Cable Feed drives and retracts 9/16” and 5/8” cables at up to 20 ft. per minute. To adjust to different cable sizes, simply turn the knob on top of the feed. The screwdriver stays in the toolbox.
The heavy-duty reinforced frame and drum support shaft take rough handling in the field. The 1/3 hp capacitor motor has plenty of power to drive more than 100 ft. of cable. And the unique self-aligning Flexitube™ distributor tube reduces the risk of cable tangling in the drum.
Greater Portability
V-Belt stair climbers make it easier for you to take the machine up a flight of stairs by yourself. The handle is tall enough to make it easy to transport to the job, yet quickly folds to take less room in your truck. Big ten inch heavy-duty semi-pneumatic wheels roll easily over rough terrain. And a truck loading wheel in the handle makes it easier for one person to lift the machine into a truck bed.
Features
- Does a better job of clearing inside drain lines up to 100 ft. long with 9/16” Flexicore cable.
- Has more torque than traditional 1/2 inch cables, yet it can be used to clear the same 3” to 4” drain lines.
- Switch to 75 ft. x 5/8” cable to add root cutting capability. Easily interchangeable drums.
- Variable speed power cable feed drives and retracts 9/16”, 5/8” and 3/4” cable at up to 20 ft. per minute.
- Handle folds for space-saving convenience in the truck.
- Drum capacity of 100 ft. of 9/16” cable, 75 ft. of 5/8” cable or 50 ft. of 3/4” cable.
- 1/3 hp capacitor motor has plenty of power to drive more than 100 ft. of cable.
- Features stair climbers, 10” ball bearing wheels, and truck loading wheel for easier handling.
- Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
- Made in U.S.A.
Power Cable Feed
The Sewerooter T-4’s Power Cable Feed is a real labor saver. It enables you to vary feeding speed in and out of the line more easily and also gives you better control when working through tough stoppages. The Guide Tube reduces whipping and drag while protecting your hands from the spinning cable. Five foot Guide Tube Extensions are available.
Stair Climbers and Truck Loading Wheel
Big ten inch heavy-duty semi-pneumatic wheels roll easily over rough terrain to and from the job. V-Belt stain climbers let you take the machine up a flight of stairs by yourself. Truck loading wheel in the handle makes it easier for one person to lift the machine into a truck bed.
Folding Handle
The handle is tall enough to make it easy to move to the job, yet quickly folds to take less room in your truck.
Flexicore®Cable
Wire rope center construction
Heavy-gauge wire is coiled tightly around 49-strand aircraft-type wire rope and heat treated. It has unequalled strength and just the right amount of flexibility. So tough it carries a one-year warranty against defect or breakage.
Flexicore patent Nos. 2,244,735 and 2,849,870
Flexicore®Patent Nos.
2,244,735 and 2,849,870
Testimonial
Michael Williams of Just Drains LLC tells why he likes General Pipe Cleaners new Sewerooter T-4 so much. An upgrade to General’s Sewerooter T-3, the T-4 does a better job of clearing inside drain lines up to 100 ft. long with 9/16″ cables, yet it can be used to clear the same 3″ to 4″ drain lines. Need to clear tree roots? Just switch drums to a 75 ft. x 5/8″ Flexicore cable to clear 3″ to 6″ lines. For more information, click Live Chat or call the Drain Brains at General at 800-245-6200.
Options
Snake-Oil Classic™
A great way to extend the life of drain cleaning tools & equipment
Snake-Oil Classic™ preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give equipment a fresh, clean smell. Available in quarts or gallons.
Quick-Fix™
General Pipe Cleaners’ Quick-Fix™ let’s you quickly repair broken drain snakes in the field. The unique Quick-Fix let’s you continue working and finish the job without having to go back to your shop to repair or replace a broken cable. The Quick-Fix is available in 1/2”, 9/16”, 5/8”, and 3/4” sizes with female or male connectors.
The specially designed spring with a pre-welded female connecter is easy to attach in the field. Prepare your broken snake by cutting off the damaged or kinked end of the cable with bolt cutters or a hack saw. Then simply thread the Quick-Fix over the broken snake. No welder is required! All you need are vice-grips or a pair of pliers. Once it’s on, the Quick-Fix holds on so tightly that it simply cannot be removed, even if you wanted to.
ClogChopper®
Rip through tough stoppages with the unique ClogChopper® multi-function cutting tools. Six self-sharpening blades dig into encrusted debris and root masses, easily grinding up stoppages, scale, and crystallized urine, without risking pipe damage.
The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls. It’s excellent for clearing stacks, downspouts, mains, as well as for drain lining jobs.
Cutter Set for 9/16" Cables (Catalog #EJCS)
AH
Arrow Head Starting Drill
Starting Drill (gets water flowing)
1-1/2 UC
1-1/2" U-Cutter
For cutting and scraping
2UC
2" U-Cutter
For cutting and scraping
RTR-1
Small Retrieving Tool
For removing loose objects and broken cables
Cutter Set for 5/8" & 3/4" Cables (Catalog #SRCS-R)
SHD
Spear Head Starting Drill
Starting drill (gets water flowing)
2UC
2" U-Cutter
For cutting and scraping
3HDSC
3" Heavy Duty Side Cutter
For cutting and scraping
3HDB
3" Heavy Duty Saw Blade
For roots and other stoppages
RTR-2
Large Retrieving Tool
For removing loose objects and broken cables
Buy Now
Buy Now - Sewerooter T-4 Units – Complete and ready to operate
Cutter Set
Replacement Cables
Parts & Accessories
Specifications
Weight:
92 lbs. (42 kg) without cable
Dimensions:
27” (68.5 cm) deep,
18-1/2” (47 cm) wide,
46” (117 cm) high; 26” (66 cm) with handle folded down.
Drum Capacity:
100 ft. x 9/16″ (30m x 14.2)
75 ft. x 5/8″ (22.5m x 15.8)
Drum Removal:
Remove one bolt and slide drum off shaft.
Motor:
1/3 hp with capacitor, forward-off-reverse switch,
20 ft. power cord and ground fault circuit interrupter.
Foot Switch:
Pneumatic, with no electrical contact between pedal and motor.
Power Cable Feed:
Drives and retracts at variable speed of up to 20 ft. per minute.
Wheels:
10” Heavy-duty wheels with roller bearings.
Wheel Brake:
Passive wheel brake system holds the machine in place on the job or in the truck.
Stair Climbers:
Heavy-duty V-belts running on nylon rollers.
Truck Loading Wheel:
Enables one person to lift machine onto bed of truck.
Cutter Holder:
Cutter Holder on frame keeps all of the cutters within easy reach.
Leather Gloves:
With double-reinforced palm for hand protection when guiding cable.
Cables:
Left-wound Flexicore® wire rope center. 3/4″ for 4″ to 10″ lines and 3″ lines without sharp bends;
5/8″ diameter for 3″ to 6″ lines;
1/2″ diameter for 2″ to 3″ lines.
Cable Guide Tube:
Adds safety when you can’t get machine close to drain opening. 5 ft. extensions available.
Do You Need Help?
Check out our Pro Tool Selection Guide or chat with a Drain Brain! We can help you by answering any questions about our products you may have.
