Drain Cleaners Jet Set Gen-Eye Gen-Ear Kinetic Water Ram Hardware Rental Specialties
Home Contact Us Warranty instructions Parts Lists Video Gallery Cables & Cutters MSDS FAQ Literature
Quick Links:
Send LiteraturePrinter Friendly Version

Speedrooter 92R

 

The Speedrooter 92R with power cable feed makes the job of drain cleaning easier, faster and cleaner for your customers. Instead of wrestling with a manual snake in and out of the line, the power cable feed drives the cable into the line at up to 20 feet per minute. Put the feed in reverse and it retracts the cable easily too. Some cables weigh up to 100 lbs. so this is a real labor savor.

The power cable feed and guide tube combination allows the cable to feed smoothly into the line while keeping your customer’s hands clean and away from the spinning cable.

The Speedrooter is job tested tough. From its frame braced at key stress points, to General’s exclusive Flexicore® wire rope center cable that’s so tough it carries a one year warranty, the Speedrooter can really take a beating.

Speedrooter 92R
  Its field tested design offers easy handling. One person can easily load it onto a truck, as the machine slides smoothly from the loading wheel to the handle to the stair climbers and finally to the wheels. The handle is tall enough to make it easy to move to the job, yet quickly folds to take less room in the vehicle.
  A drum holds 100 feet of 3/4” or 5/8” Flexicore® cable and has a see-through inner cage, so you can quickly see how much cable is left in the drum
 

Truck Loading
One person easily loads the Speedrooter 92 onto a truck. The swept-back handle and loading wheel give you the needed leverage.

 

Portability, Convenience and Safety
Equipped with 10" heavy-duty wheels, stair climbers, tool box and ground fault circuit interpreter.

 

   
   
 

V-belt Stair Climbers
V-belt stair climbers like the ones used to move heavy furniture and appliances let you take the Speedrooter 92R up a flight of stairs yourself.

 

Guide Tube
Greatly increases the efficiency of power cable feed by reducing cable whipping and drag. Keeps your hands off of the spinning cable. Tube is 30” long. Five foot extensions are made of rigid conduit with a flexible spring end.

 
   
 

Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.

Flexicore Patent Nos. 2,244,735 and 2,849,870

 

Reverse Switch
A momentary contact reverse switch protects the cable by preventing the operator from running the machine in reverse for more than a few seconds at a time
.

 
   
 
Cutter Set for 5/8" & 3/4" Cables – Catalog #SRCS-R
Cutter
Part
Number
Application
SHD
Spear Head
SHD
Starting Drill
(Gets water flowing)
UC
2" U-Cutter
2UC
For cutting and scraping
HDSC
3" Heavy Duty Side Cutter
3HDSC
For cutting and scraping
HDB
3" Heavy Duty Saw Blade
3HDB
For roots and other stoppages
RTR-2
Large Retrieving Tool
RTR-2
For removing loose objects and broken cables
   
 

Speedrooter 92R (Open Drum) Units – Complete and Ready to Operate

The following units, which are COMPLETE AND READY TO OPERATE, consist of Speedrooter 92 R (basic unit), 1/3 hp heavy duty motor, capacitor start, thermal overload protection, Forward/Off/Momentary Contact Reverse Switch.10” Heavy-Duty Wheels and Folding Handle, Air Foot Switch, Safety Slip Clutch, and equipment as indicated.
Catalog Number Description

PS92-C-O

100 ft. x 3/4” (100EM5) cable, SRCS-R cutter set, Power Cable Feed and Guide Tube

PS92-E-O

With 100 ft. x 5/8” (100EM4) cable, SRCS-R cutter, Power Cable Feed and Guide Tube

BOLD listing denotes the best-selling model.
   
 
Speedrooter 92R – Specifications
Weight:
115 lbs. (52 kg) without cable
Dimensions:
26” deep, 22” wide, 41” high (66 cm x 56 cm 104 cm)
Drum:
Drum holds 100 ft x 3/4” or 5/8” cable (30 m x 19 mm or 17 mm).
Drum Removal:
Loosen two knobs, remove ringbolt, and lift off.
Motor:
1/3 hp heavy duty, capacitor start, thermal overload protection, Forward/Off/Momentary Contact Reverse Switch.
Foot Switch:
Pneumatic, with no electrical contact between pedal and motor.
Power Cable Feed:
Drives and retracts at variable speeds of up to 20 ft. per minute.
Cable Guide Tube:
Keeps operators hands clean and off spinning cable.  5 ft. extensions available.
Wheels:
10” Heavy-duty wheels with roller bearings.
Stair Climbers:
Heavy-duty V-belts running on nylon rollers.
Passive Wheel Brake:
Keeps machine in place on the job or in the truck.
Folding
Tall enough to make it easy to move to the job, yet quickly folds to take less room in vehicle.
Truck Loading Wheel:
Enables one person to lift machine onto bed of truck.
Tool Box:
Attached to rear of machine.  Holds all cutters.
Leather Gloves:
With double-reinforced palm for hand protection when guiding cable.
Cables:
Left wound Flexicore® wire rope center 3/4” diameter for 4” to 10” lines and 3” lines without sharp bends; 5/8” diameter for 3” to 6” lines.
Cutters: SRCS-R Cutter Set for 5/8” and 3/4” cables
SHD  Spear Head
2UC  2” U-Cutter
3HDSC  3” Heavy Duty Side Cutter
3HDB  3” Heavy Duty Saw Blade
RTR-2  Large Retrieving Tool
Instructional Video included.
UL

Bookmark and Share

Select Language

Global Dealer Finder
General Wire Spring
Facebook
YouTube
Google +
LinkedIn
Twiiter

Drain Cleaners | Jet-Set | Gen-Eye | Kinetic Water Ram | Hardware | Rental | Specialties
Home | Contact Us | Warranty | Instructions | Parts Lists | Video Gallery | Cables & Cutters | SDS | FAQ | Literature
What's New | Success Stories | Ask the Drain Brains | Blog | Join Our E-mail List

General Pipe Cleaners

General Pipe Cleaners
Division of General Wire Spring Company

1101 Thompson Avenue McKees Rocks, PA 15136 USA
800-245-6200 • 412-771-6300 • FAX 412-771-2771
E-Mail


© General Wire Spring Co. 2016

MADE IN USA