Drain Cleaners Jet Set Gen-Eye Gen-Ear Kinetic Water Ram Hardware Rental Specialties
Home Contact Us Warranty instructions Parts Lists Video Gallery Cables & Cutters MSDS FAQ Literature
Quick Links:
Send Literature
Printer Friendly Version
Operating Instructions
Parts Lists

I-95

 

Here’s a sectional cable machine that drives 7/8" and 5/8" sections – or even 5/16" cables for small drain work. You can switch from 7/8" to 5/8" and back by repositioning the chuck cone. No adapter required. Attach a small drum to the back of the machine to drive smaller cables.

The I-95 gives you more than versatility. It gives you power and convenience. The motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cables. Yet, as soon as you lift the drive handle, the cable stops rotating, so there’s no additional torque build up.

You also use the drive handle to carry the machine. And when the I-95 is in position on the job, its four point base gives it rock-solid stability. A cutter holder is attached to the back so your cutting heads are always with the machine. A ground fault circuit interrupter is standard equipment.

i-95

 
 

Light weight I-95 is wasy to carry up a ladder.

I-95 Accesories

Accessories include cable carriers, drums for small drain work, a rear guide hose, and a tool box (standard on 7/8” cable units.).

7-1/2 ft. x 5/8"
(2.3m x 15.6 mm)
for 1-1/4" through 3"
(31 mm – 75 mm) lines
(Cat. No. 7.5R8).

15 ft. x 7/8"
(4.6 m x 21.9 mm)
for 2"–4"
(50 mm – 100 mm) lines
Cat No. 15R10).

“T” slot couplings slide together to lock and uncouple with a pin key.
 
Cutter Set for 5/8" Sectional Cables with "R" Connector – Catalog # R-8CS
Cutter
Part Number
Application
R-AH
Arrow Head
R-AH
Starting Drill (Gets water flowing)
R-BG
Boring Gimlet
R-BG
For removing loose objects
UC
1-1/2" U-Cutter
R-1-1/2 UC
For cutting and scraping
R-RTR-1
Retrieving Tool
R-RTR-1
For removing loose objects and broken cables
Coupling Key
RCK-8
To disconnect cables and cutters

Cutter Set 7/8" Sectional Cables with "R" Connectors – Catalog # R-10CS
Cutter
Part Number
Application
R-SHD-10
Spear Head
R-SHD-10
Starting Drill (Gets water flowing)
R-HA-10
Hook Auger
R-HA-10
For removing loose objects
R-2UC-10
2" & 3" U-Cutter
R-2UC-10
R-3UC-10
For cutting and scraping
R-RTR-10
Retrieving Tool
R-RTR-10
For removing loose objects and broken cables
 
Coupling Key
RCK-10
To disconnect cables and cutters

I-95 Units – Complete and Ready to Operate (Includes rear guide hose)

I-95-A Includes six 7-1/2 ft. x 5/8" sections (7.5R8), an SCC small cable carrier,
and an R-8CS cutter set.
I-95-C Includes five 15 ft. x 7/8" sections (15R10), a CC cable carrier,
R-10CS cutter set and a tool box.
I-95-D Combines Units A and C.
I-95-E Same as I-95-D, plus small drum (95-25A) with 25 ft. x 5/16" cable (25HE1-A) installed.

BOLD listing denotes the best-selling model.


I-95™ Specifications
Weight:
39 lbs. (18 kg)
Dimensions:
14" deep x 12" wide x 23" high. (35.5 cm x 30.5 cm x 58.4 cm)
Motor:
1/3 hp with forward-off-reverse switch, ten foot power cord, and ground fault circuit interrupter.
Adjustable Chucks:
Has two sets of notches; one for 5/8" cables and one for 7/8" cables.
Switch from one diameter to the other in seconds.
Leather Gloves:
Double palm, for hand protection when guiding cable.
Drum:
(Optional) Holds 25 ft. of 5/16” cable for 1-1/2” to 2” lines, or 35 ft. x 3/8” cable for 2” to 3” lines.
Cables:
“T” slot couplings slide together to lock and uncouple with a pin key.
7.5R8 - 7-1/2 ft. x 5/8" (2.3m x 15.6 mm) for 1-1/4" through 3"
(30 mm – 75 mm) lines up to 125 ft long;
15R10 or 15R10P with Proflex inner core – 15 ft. x 7/8" (4.6 m x 22 mm) for 2" – 4"
(50 mm – 100 mm) lines up to 150 ft. long.
Cutter set for 7/8" cables:
Spear Head, 2" U-Cutter, 3" U-Cutter, Hook Auger and Retrieving Tool.
Cutter set for 5/8" cables:
Arrow Head, Boring Gimlet, 1-1/2" U-Cutter and Retrieving Tool.

UL
Made in USA

Bookmark and Share
Select Language

Global Dealer Finder
General Wire Spring
Facebook
YouTube
Google +
LinkedIn
Twiiter

Drain Cleaners | Jet-Set | Gen-Eye | Kinetic Water Ram | Hardware | Rental | Specialties
Home | Contact Us | Warranty | Instructions | Parts Lists | Video Gallery | Cables & Cutters | SDS | FAQ | Literature
What's New | Success Stories | Ask the Drain Brains | Blog | Join Our E-mail List

General Pipe Cleaners

General Pipe Cleaners
Division of General Wire Spring Company

1101 Thompson Avenue McKees Rocks, PA 15136 USA
800-245-6200 • 412-771-6300 • FAX 412-771-2771
E-Mail


© General Wire Spring Co. 2016

MADE IN USA