Drain Cleaners Jet Set Gen-Eye Gen-Ear Kinetic Water Ram Hardware Rental Specialties
Home Contact Us Warranty instructions Parts Lists Video Gallery Cables & Cutters MSDS FAQ Literature

Success Stories Printer Friendly Version Send Literature and Free DVDRequest Demonstration

Jet Nozzles


  Whether you’re up against grease, sand, or ice, there’s a General Nozzle that will cut through it. Some are designed for maximum penetrating power, some are designed to pressure wash the pipe walls, and some are designed to go around sharp bends. All of General’s Nozzles are made of hardened stainless steel to last longer.  

 

Jet Nozzles

Powerful Penetrating Nozzle cuts through grease and ice.

Jet Nozzles

Spring Leader Nozzle helps guide hose around tight bends
and P-traps.

Jet Nozzles

Wide spray Flushing Nozzle cleans inside of pipe

Jet Nozzles

Downhead Nozzle takes hose down Tee’s and around difficult corners.


  Rotary Nozzle  
  Make sure you leave the lines crystal clear with General’s Rotary Nozzles. The JN-RB heavy duty hardened stainless steel rotary nozzles have two 90 degree jets to scour the walls of the pipe, and two 35 degree jets to drive the hose down the line. The less expensive JN-RA hardened steel rotary nozzles have two 45 degree jets for combined thrust and cleaning action.

  Chain Saw Nozzle  
 

Rip through roots with the Chain Saw Nozzle. Lengths of chain can quickly and easily be switched for different diameter pipes. Spins at up to 10,000 RPM.

  • 1/2" nozzle works well in combination with the 12 gpm Typhoon trailer jet to clear 4", 6", 8", and 10" lines.
  • 3/8" nozzle is available in 4, 5.5 and 8 gpm models to clear 4", 6", and 8" lines.

  High Performance Nozzles  
 
General’s High Performance Nozzles for the Typhoon trailer jet incorporate patented fluid mechanics that significantly increases the thrust, pulling power, and cleaning power of the nozzles without needing to increase the water flow or pressure.
Other nozzles simply let the water churn around inside until it finds its way out the nearest orifice. High Performance Nozzles are custom machined to redirect the water through highly efficient inner surface channels directed toward each orifice. The nozzles have replaceable threaded inserts at each orifice, so when the nozzle wears, you only have to replace the inserts, not the whole nozzle. A set of insets are a fraction of the cost of a replacement nozzle.

 
 
Chisel Point Nozzle is a good starting tool to loosen debris and sand to flush it from the pipe. It includes four forward jets and six rear jets. (The four forward jets are replaceable, the rear jets are not.) Cat # JN-HP-151
Traction Nozzle is ideal for blasting sand and mud from the line. It includes one jet forward and six jets to the rear. (All seven jets are replaceable.) Cat # JN-HP-152

 

Cleaning Nozzle is used as a finishing tool to flush the line clean. It has all eight jets to the rear. (All jets are replaceable.) Cat # JN-HP-153

 

 
When you switch to General’s High Performance Nozzles you’ll get improved cleaning results, and you’ll typically use less fuel, man- hours, and water than other nozzles to get the job done. You’ll spend time "in the line" cleaning and less time refilling the water tank.

JN-0 1/8" Nozzle Set for JM-1000 & JM-1450
Includes:
JN-1 15° Angle Nozzle
JN-2 15° Angle Nozzle with forward jet
JN-3 30° Angle Nozzle
JN-SL-1 Spring Leader Nozzle
JN-10 1/4" Nozzle Set for JM-1450
Includes:  
JN-11 15° Angle Nozzle
JN-12 15° Angle Nozzle with forward jet
JN-14 40° Angle Nozzle
JN-SL-2 Spring Leader Nozzle
JN-20 3/8" Nozzle Set for JM-1450
Includes:  
JN-21 15° Angle Nozzle
JN-22 15° Angle Nozzle with forward jet
JN-24 40° Angle Nozzle
JN-SL-3 Spring Leader Nozzle
JN-30 1/8" Nozzle Set for JM-2900 & JM-3000
Includes:  
JN-31 15° Angle Nozzle
JN-32 15° Angle Nozzle with forward jet
JN-33 30° Angle Nozzle
JN-SL-4 Spring Leader Nozzle
JN-40 1/4" Nozzle Set for JM-2900 & JM-3000
Includes:  
JN-41 15° Angle Nozzle
JN-42 15° Angle Nozzle with forward jet
JN-44 40° Angle Nozzle
JN-SL-5 Spring Leader Nozzle
JN-50 3/8" Nozzle Set for JM-2900 & JM-3000
Includes:  
JN-51 15° Angle Nozzle
JN-52 15° Angle Nozzle with forward jet
JN-54 40° Angle Nozzle
JN-SL-6 Spring Leader Nozzle
JN-60 1/8" Nozzle Set for JM-3055
Includes:  
JN-61 15° Angle Nozzle
JN-62 15° Angle Nozzle with forward jet
JN-63 30° Angle Nozzle
JN-SL-7 Spring Leader Nozzle
JN-70 1/4" Nozzle Set for JM-3055
Includes:  
Jn-71 15° Angle Nozzle
JN-72 15° Angle Nozzle with forward jet
JN-74 40° Angle Nozzle
JN-SL-8 Spring Leader Nozzle
JN-80 3/8" Nozzle Set for JM-3055
Includes:  
JN-81 15° Angle Nozzle
JN-82 15° Angle Nozzle with forward jet
JN-84 40° Angle Nozzle
JN-SL-9 Spring Leader Nozzle
JN-100-1 1/4" Nozzle Set for JM-3080
Includes:  
JN-101-1 15° Angle Nozzle
JN-102-1 15° Angle Nozzle with forward jet
JN-104-1 40° Angle Nozzle
JN-SL-11 Spring Leader Nozzle
JN-110-1 3/8" Nozzle Set for JM-3080
Includes:  
JN-111-1 15° Angle Nozzle
JN-112-1 15° Angle Nozzle with forward jet
JN-114-1 40° Angle Nozzle
JN-SL-12 Spring Leader Nozzle
JN-HP-150 1/2" High Performance Nozzle Set for JM-2512 Trailer Jet
Includes:  
JN-HP-151 Chisel Point Nozzle
JN-HP-152 Traction Nozzle
JN-HP-153 Cleaning Nozzle

Inserts for High Performance Nozzles
JN-HP-M6-151 4 pc. Insert Set for Chisel Point Nozzle
JN-HP-M6-152 7 pc. Insert Set for Traction Nozzle
JN-HP-M6-153 8 pc. Insert Set for Cleaning Nozzle

Down Head Nozzles
JN-DH-1 1/8" Down Head Nozzle  for JM-1000 & JM-1450
JN-DH-4 1/8" Down Head Nozzle  for JM-2900 & JM-3000
Rotary Nozzles
JN-RA-2 1/4" Standard Rotary Nozzle  for JM-1000 & JM-1450
JN-RA-4 1/4" Standard Rotary Nozzle   for JM-2900 & JM-3000
JN-RB-2 1/4" Deluxe Rotary Nozzle for JM-1000 & JM-1450
JN-RB-4 1/4" Deluxe Rotary Nozzle  for JM-2900 & JM-3000
JN-RB-6 3/8" Deluxe Rotary Nozzle  for JM-2900 & JM-3000
JN-RB-7 1/4" Deluxe Rotary Nozzle  for JM-3055
JN-RB-9 3/8" Deluxe Rotary Nozzle  for JM-3055
JN-RB-11 3/8" Deluxe Rotary Nozzle  for JM-3080
JN-RB-14 3/8" Deluxe Rotary Nozzle  for JM-2512
JN-RB-15 1/2" Deluxe Rotary Nozzle  for JM-2512
Chain Saw Nozzles
J-CSN-6 3/8" Chain Saw Nozzle  for JM-2900 & JM-3000
J-CSN-9 3/8" Chain Saw Nozzle  for JM-3055
J-CSN-11 3/8" Chain Saw Nozzle  for JM-3080
J-CSN-15 1/2" Chain Saw Nozzle  for JM-2512

Bookmark and Share
Select Language

Global Dealer Finder
General Wire Spring
Facebook
YouTube
Google +
LinkedIn
Twiiter

Drain Cleaners | Jet-Set | Gen-Eye | Kinetic Water Ram | Hardware | Rental | Specialties
Home | Contact Us | Warranty | Instructions | Parts Lists | Video Gallery | Cables & Cutters | SDS | FAQ | Literature
What's New | Success Stories | Ask the Drain Brains | Blog | Join Our E-mail List

General Pipe Cleaners

General Pipe Cleaners
Division of General Wire Spring Company

1101 Thompson Avenue McKees Rocks, PA 15136 USA
800-245-6200 • 412-771-6300 • FAX 412-771-2771
E-Mail


© General Wire Spring Co. 2016

MADE IN USA